Hey there! Happy Monday…not so fun day! It’s not long until Valentine’s Day, and as I was throwing up a few decorations this weekend in celebration…a little late, yes, I know…but I’m not opposed to ‘love’ stuff up year round so there is never really a ‘too late’ for this! That means it’s not too late for you to make this too and leave it up all year long as well! And, if you read this quickly you can have it made and hung on your wall in a matter of minutes! LOL!
Happy Monday Everyone!! Alright, I have to know, have you ever, or do you now had/have a space in your home that drives you crazy? Whether you are renting or you own your home, today’s post on this DIY faux barn door room divider is for you!
This project is dear to my heart because we are renting right now and if you have ever rented you know how that goes…your inner decorating goddess is screaming at the top of her lungs about things that make her insanely crazy because she hates them but yet can’t change them because…well, your just renting and it is not your home! LOL!!! Well, that has been going on in me for a LOOOOOOONG time, but this last weekend I tackled one of these problems! I built this faux barn door to divide the rooms!
So, in our rental, there
is was no real defined “living room” in our house, it is all open, and although I love open floor plans, I do not like AWKWARD open floor plans, which is what this is was! HAHAHA! So, the previous owner decided to close in a patio… great because this is a small house…and also, not great because it created a very strange small room, although I don’t know if you can even call it a room! It makes for a little extra space in the house, but at the expense of the living room always looking a mess because your eye is very distracted! Anyway, to make this long story short…I closed in this space in a very temporary way, or it could stay forever if we wanted to buy the house…PERFECTION! Okay well, not my woodworking on this one; but the idea! HA! Here was the space making my life miserable…
Now, I realize this picture is not a grand shot…it was night and the place was a mess…hence, all that you can see on the floor! But the space itself looks mostly harmless besides the horrid vertical blinds…but DO NOT be fooled, I should have taken a picture of the whole living room to give you the best idea, BUT, the place was a disaster and if I wanted my hubby’s help, I had to take it RIGHT then, he wasn’t waiting for us to pick it up!
The small sliver of wall you see to the left…that is the only “wall” on that side of the living room and it ends right there where the picture ends!! So are you envisioning this properly?! Scary right?! Let’s refresh our mind with the new one! Lol! Anyway, I LOVE LOVE LOVE sliding barn doors and every room in my home would have one…but…it’s not my home, and in this rental, there is NO PLACE for a sliding barn door! So, in my brainstorming to fill in this large hole (as I will call it because that is what it has seemed like to me this whole time we have been living here) I wanted some type of barn door but of course it couldn’t slide, so I decided to make it a fake door and just make it look like a barn door…I have to say I could not be happier to have a barn door and at the same time fill in this “hole” I have hated for like three years…yeah, I know, we really should have found a home by now but if you ever visit our town and check out our housing market, you would quickly understand! LOL!!
So, yes this project helps with my problem but it still gets BETTER! On the backside of the fake door, I made a huge chalkboard for my boys to draw me beautiful, nearly life-size pics of wooly mammoths and fire trucks, or anything else their wild imaginations can dream up! Cha-ching! This just solved another problem I had… the little easel we had sitting in this area, my little guys loved it and didn’t want me to get rid of it, but now they are completely fine with giving the easel away! Yea!!! I am still on cloud nine over this whole project! Check out the DIY chalk and eraser holders I made as well!
I guess I should stop dancing on cloud nine and come back to help you solve the world’s problems as I did! OKAY, maybe not the world’s problems…that is a BIT of a stretch… but sometimes it just feels so good to fix something that has been bothering you for so long! ????
Building the DIY Barn Door Room Divider
The materials you will need for this will probably be different than mine because your opening will probably be of a different size than mine, but I will give you the list and you will just have to alter it based on your measurements! My measurements were 61.5″ x 81″ and because of the measurements, I chose 1×6’s as my size of boards. If you have a smaller opening, you may want to go with a smaller board, such as a 1×4 or you can still use 1×6’s depending on what works to fit the space. Don’t forget when trying to figure out what size board you need, your boards measure smaller than their stated size, for instance, a 1×6 when actually measured is 3/4″ x 5.5″.
My supply list:
11 – 1x6x8
11 – 1x4x8
I will not supply a cut list as every list will be different; not all of my boards were cut to the same length anyway because this “hole” was not square at all, which is why I had to go with the design plan that I did!
I started out by cutting the 1×6 boards down to fit the opening, the opening actually ended up being only 80 1/2″ on one end…so it was very hard to just cut all the boards to one size. I ended up cutting my very first board to fit the end that measured 81″ and so I cut it just shy of that, I believe I went with 80.75″ and before I moved on to the next board I brought it inside and checked to make sure it would fit inside the opening, and I did so with EVERY board, I would move down roughly 6 inches in the opening and make sure the board fit before I moved on to the next because with a catty-wumpus opening like I was working with I was worried in the beginning that when I pocket holed them all together it wasn’t going to work…but it did! Yea!
So after cutting all the boards and making sure they all fit, I took them back to the garage and I had a 4×4 that I used to line the bottom of all of them against…if I had a clean garage, I would have just used the wall, but in my garage, good luck even finding a wall! LOL! (NOTE: a goal of mine for 2015 is to REALLY clean out the garage!)
This picture shows my pocket holes already drilled because the other picture I had taken before I drilled pocket holes was blurry…not sure what I did…lol! But see how the boards are lined up against the 4×4!
Next, I made sure they fit together well and made sure of which side I wanted to be the front, the boards I bought were actually really straight…unbelievable, I know! I spend hours looking for boards and it seems like they bow and cup on my way home…I swear sometimes they have to! Anyway, if your boards are really straight and the edges really sharp like 1×6’s usually are, they look like one solid piece when you lay them all together, so I took my sander and sanded the front edges of all of the boards to round the corners so you could tell that they were boards planked together!
After dusting myself off, I drilled a BUNCH of pocket holes! I used my Kreg Jig R3 to do my pocket holes and if you don’t have one already…you MUST get yourself one ASAP!!! LOL! But seriously if you have a Home Depot or Lowe’s gift card laying around that you got for Christmas and your not sure what to buy with it…get your keys and leave right now to pick one up! HAHA! Okay but really it made this project so simple and I wouldn’t have attempted this project without one, because I don’t know how I would have planked the boards together any other way! I bought the most inexpensive model they made because I really wasn’t sure if I was going to be able to use it…well, I may have to upgrade soon, but I can’t talk myself into it because the little R3 does everything I need! You can also get it HERE!
Just a quick overview for anyone who doesn’t know what a Kreg Jig is, or how it works: So you take your jig, that’s what I’m holding here:
you can barely see it there, but it says 3/4 and our board is 3/4 in, so that’s perfect! And you just clamp it to your board that you need holes in like so:
(this picture is just for a sample, this is not a board I used on this project)
The drill bit itself that comes with your Kreg will have a band around the top that you can move as well depending on the depth of wood you are drilling into, so you need to make sure and adjust it like so:
Ever so slightly you can see the band around the bit is at 3/4″ which is right where we need it since our wood is 3/4″ thick! Now you just put the bit into your drill and, yep, drill baby!!! Now you have the first of like 60 holes to drill done! HA! Sounds daunting but I had them all drilled and the cramp in my hand massaged out in like 30 minutes! LOL! The holes need to be drilled into the sides of the boards, not the ends like in the sample pic I displayed a minute ago, so your boards up close should look like this:
See how simple that was! We have almost closed in the space that has been making me/you crazy! Ha! Okay, maybe not that quick but there isn’t too much more to it!
Now that all the boards are planked together, we need to add all of the framing pieces to make it start looking like a barn door!
You will need to stand it up at this point, grab all those 1×4’s. I needed to make sure my board across the top was straight even though the boards were fitting into an opening that wasn’t straight…does that make any sense? The top 1×4 will be attached to the door only by about an inch and a half, the rest will overhang and attach to the wall so you can’t just align this board flush with the top of the planked boards. I used a laser level across the top of the boards about an inch and a half down from the top of the planked boards to make sure the line that I was using as a guide to attach my top board was straight So I then clamped the board to the top along the laser line!
Believe it or not, that is straight across the top…my camera just wasn’t! LOL! Okay, so now you can’t attach this board because we need to cut it, but you can’t cut it until we know how wide it will be with the sideboards attached…you can’t just add the 3.5″ of a 1×4 because the 1×4’s will be attached to the top of the end boards, that will create the illusion of being on top of the door but yet it will be hanging over the edge to give you a lip to screw into the wall! Blah! That sounds confusing…it’s not once we see pictures and keep talking! Ha! So keeping the top board clamped, take another 1×4 that you are using on the side and measure it from the ground to the top board you have clamped, and draw a line for you to cut.
Once you have marked your boards for the side, you can cut them and at this point, you will need someone to help… and pretty much the rest of the project because it is so big and not very steady while standing up! I cut small sections out of the bottom of the two sides of the 1×4’s just before attaching them to fit around the base molding, since it is a rental, I couldn’t remove the base molding to make it lay flat against the wall, so this was the next best thing!
I simply measured the height of the molding and cut out a section that high on my board, leaving a small piece behind to attach to the planked boards! I used our crappy little jigsaw to cut the notches, my husband bought it forever ago, he maybe paid $30 for the thing…you can only imagine what a beauty it is! LMBO! But, it did get the job done! In a later picture I can show you what I mean, if you aren’t quite understanding why I did this! lol! After gluing and clamping the sideboard on as best we could, I predrilled holes and then used 1 1/4″ screws screwed in from the backside while my husband gave resistance from the front side! Repeat the same with the other side, all the while keeping the top board clamped on still!
Now you can mark your top boards where the sideboards end and you can cut your top board to length, I drew a pencil line under the top board before I removed it so that it would be easy to realign this board once it’s cut! Now, to give it the appearance of a real door, you cut the top board in half to create the illusion of two doors (the blade width is perfect size for the gap, that’s why I cut it in half after cutting it to the correct length) you can then attach the two pieces across the top, making sure to line up the ends of the boards with the ends of your door, to leave the gap in the middle of the two boards! Then we did the same with the top pieces as we did with the side- glued and clamped as best we could, predrilled holes and screwed from the back with 1 1/4″ screws!
Next step, we can move on to the bottom, we are cruising right along here cutting and screwing and feeling like it is slowly becoming a door! Yea! But we can’t celebrate yet! Well, you can- just make it quick! Haha! Okay, so grab another 1×4 for the bottom, this one will be slightly different in that it will be completely flush with the bottom boards, you don’t need an overhang here! So just measure in between the two side pieces and cut the board, then like we did the top board, cut it directly in half and when attaching to the door make sure to leave the small gap in between the two boards, again to give the illusion of real doors! I had to prop mine up all crazy to be able to drill from the back and line them up flush but you can see my gap here in the middle!
Also, this is a good pic to try and explain what I was meaning a minute ago about the cutouts and overhang. In the pic at the bottom of the door, you can see where the cutouts are, the part that is cut out is completely overhanging (sticks out past) the planked boards, the small sliver that is not cut out is attached to the planked boards – this planked section will fit directly into the opening in my living room and the overhang will stand on the outside of the opening and be screwed into the wall! Hopefully, that sort of helps to clarify, if not feel free to ask questions in the comments below or on the contact page! I know when I would describe what I was needing to do, even to my husband was a little confused at first, until he actually physically saw me placing the boards and explaining at the same time, so obviously, I don’t explain something right that my brain sees! LOL! What is new, right? It’s craziness in my head, but I hope you can make sense of it!
Make sure to glue, pre-drill and screw those boards on just the same as the others!
Almost there! Now you just need to measure to cut your two pieces in the middle that really split the planked wood and make it look more like two doors! Just measure in between your bottom and top boards right in the middle, cut them, and these two are a little harder to attach because you can’t clamp them and they are in the middle of the planked wood so you really aren’t sure where you are drilling from the backside! It is a mystery until your board either sucks up to the planked boards or you see a screw come through the planked boards somewhere!!! Ok, really you can just count the boards over in the front and then count the same number over in the back and screw them in! No biggy! HA!
But now when you add the diagonal boards, that can be tricky, but I stuck with a really simple design and I actually wish I would have tried a more complicated one…too late now! AW MAN! So, I was really worried about having to cut an angle without my miter saw because, well, I am not good at freehand ANYTHING! But I quickly just made a guide for my self out of a scrap piece of wood and it was so simple! I laid my 1×4 board against the door to mark where I needed to cut, I positioned it at the angle I needed it to be and marked both sides of the bottom part of the board, laid it on the table and connected the two marks with my square and this gave me the angle line I needed to cut! Then you have to back up from your line as far as your saws plate is…my jigsaw has a very small plate so this is all the more I had to back it up away from my line in the picture below! Now if you were able to follow along with all that…GREAT! If not…SORRY, I didn’t take any pictures other than the one of my guide down below! So, again feel free to ask anything below!
So, now you just repeat this same process with the top of the board and the top and bottom of the next board, glue them and screw them from the back and…va va voom! Done! Well almost! I was definitely celebrating and happy dancing because I was really worried that my angles weren’t going to work but AMAZINGLY enough…they DID! Hallelujah!
Then it is the tedious, no fun part! The sanding and staining…yuck! Lol! Okay, well I spilt a whole can of stain and had to wait for my hubs to run to Wal-Mart and grab a new can…and luckily I was using Minwax stain on this project, normally I only use Rust-oleum stains because they are so much quicker to dry and are awesome with just one coat… but they quit making Early American and that is the color I wanted to use on this project! I bought their new Wheat but it wasn’t the same as Early American, it was more orangey than I like, so I went with Minwax on this one! I used this stain here.
Here she is all stained and waiting to dry!
Lastly, you will need to lay it face down after its dry of course, or before staining it at all…totally up to you, to measure another 1×4 for each of the sides and a 1×4 for the top to be your frame to your faux door! I cut the sideboards to fit inside the (new) top board and stained them separate from the door.
Once it all dries, you bring it in and screw it into the wall!! Buh Bam! I used 2-inch screws into the framing stud in the wall, held perfectly! I did not attach the frame boards to the door in any way, I just screwed them into the wall around the door using the same 2 in. screws!
I picked my hinges after having the door completed, and the hinges were longer than my board, and it left a space like this…
but I STILL liked them, so I cut small scraps of 1×2 to go under the part of the hinge than was sticking out past the board!
I just stained them and then predrilled holes and screwed them into the door with the screws that came with the hinges! Bata Bing!
Done on ONE side! Well, I still need to cover my screw heads (as seen in the pic above)! LOL!!! Make sure and check out the backside of the barn door here!
I hope you agree that this is so much better than it was before!????
Check out my faux barn door later that year all beautiful and ready for Christmas!????
Well there you have it, I solved my problem!???? Any questions or comments feel free to post them down below!
I would love for you to share and pin! Hopefully, this may inspire you to tackle something driving you crazy in your home! Have a great week!
Hey there! Sorry I have been away for so long! I thought with my little one going off to Kindergarten I would have so much time on my hands, but as it turns out, I very rarely seem to be able to find time to build or craft, let alone blog about it afterwards!! Lol! In my very little spare time, my sister and I have also been busy planning my grandparents a surprise 60th Anniversary party…yea I know, 60 years, how DID they do it? Maybe I can have my Grandmother do a post on her tricks of staying married that long because boy, I sure could use some advice in that department…heck we all probably could…AMIRIGHT! HAHA!!
So as a very quick, simple and inexpensive décor idea for the dinner table, we made these plain wood boxes and dressed them up with some nice fake flowers! Since my sister and I were planning the party together, she and even my dad joined in making the boxes…simplest project ever and I get the most help from my family…that figures…haha!
Hello Again Friends!!! I’m back with a new project for you all! This one is a little easier and quicker to make than the last! Lol!
In my son’s room, we had a problem with finding a place for his books, his room is tee-tiny and with a twin bed, dresser, nightstand, and small chair he is ALL out of floor space! We settled on the idea of something to hold books that could be wall-mounted and hold just a few books that are on his level right now, and we could house his other books on a shelf in another room! I had seen a wood and wire wall hanging basket at PB Teen and loved it, but it had four baskets and was WAY too long for the small space we have available even on the wall in his tiny room! So, of course, I figured that I could throw together this set of DIY wall hanging storage baskets that looked similar but is a smaller version to fit his space!
Here is my version!
My inspiration piece had 4 baskets, we only had room for two baskets but you can easily make this with three or four baskets and still come in much cheaper than their cost at $99.00 plus shipping and taxes. In total, I spent $32.00 on this with two baskets and wood but you can save $5.00 if you have a scrap piece of 1×6 laying around! You would spend a total of $57.00 if you made this using four baskets, so it’s still a good deal! And I love the idea of being able to DIY things simply because you can customize them to exactly what you want!
See my inspiration for this piece HERE!!
Let’s get this tutorial rolling!
How to make – DIY Wall Hanging Storage Baskets
1 – 1×6 cut at 33″
2 – wire baskets – I got mine at Hobby Lobby, but found these cuties on Amazon!
4 – 2-inch mending plates
4 – #12 finishing washers
4 – 3/4 machine screws and nuts
optional: Dremel tool
This project is so simple and easy, the longest part was letting the stain and paint dry, other than that it was only about 30 minutes of assembly and hanging! That’s my kind of project! I love it when it is so quick and helps with a problem we have had for quite some time now! Also, it’s surprising how many books the little baskets can hold, my son is into the smaller chapter books, and each basket can easily hold 15-20 books! Score! That keeps about 40 books from getting stuffed in a drawer, left on the floor or thrown in a toy box…you know…wherever feels right while they are “cleaning”! LOL! If you don’t need a space for books, you could use the baskets for a host of other items!
So to get started, cut your 1×6 to 33″ or if you prefer, you can cut it a little longer, I had thought about making it a little longer and hanging a chalkboard in between the two baskets so my little one could write down the page number he stopped on and such…but there again…not enough wall space in his itty-bitty room, but something you may have room for!
Okay, after cutting your wood, stain it using whatever stain your little heart desires! My heart LOVES dark walnut and I absolutely LOVE Varathane stain, ONE coat and done…dries in an hour or less! Can’t beat it I’m telling you! (Varathane stain is sold at Home Depot but it is made by Rust-oleum so if you find Rust-oleum Dark Walnut at Lowe’s or another store, it is the same thing)! You can now find it on Amazon as well!
While letting the wood dry, I spray painted the baskets because, well, they were turquoise when I bought them!
Yep! This is what they started out like! I got them on sale at Hobby Lobby for 50% off which made them worth a little extra work! If I couldn’t have got them on sale I would have continued my search until I found something different, but at $12.50 each, I was SOLD! I had been searching for quite some time to find wall hanging wire baskets and everything was rather expensive so I was beyond happy when I stumbled across these babies!
After two coats of this spray paint, they were looking much better!
I forgot to snap a picture right after painting them…my apologies!
After waiting a little while for everything to dry, it is time to attach the mending plates to the basket. This part may seem a little tricky but it really was not at all!
Here are the fasteners I used.
On each basket there are two hanging holes, on each hole you will need a mending plate on the backside of the basket then you will put one of the machine screws through the mending plate and then through the hole, on the inside of the basket you will place your finishing washer and then the nut! The screw will be sticking out pretty far and you can cut it with a hand saw or I used a Dremel tool! They will look a little something like this!
Then you give them a quick spray with the same spray paint you painted the basket with just so all the metals look like they were supposed to be there! Now they are ready to be attached to the wood! Woohoo!
The mending plates come with little screws that work perfect for attaching the baskets to the wood, so you just line them up where you want them and screw them in! Fantastic!!
Now you are ready to stencil on the numbers if you would like! I had these stencils from Hobby Lobby that I had bought for another project, I never used them so, Whoop! Whoop! You can find them at Wal-Mart, Hobby Lobby or even cut your own if you have a die-cut machine like a Cricut! I linked some above in the materials list from Amazon!
I used double-sided permanent tape, though it is NOT permanent (luckily), to hold my stencils down to where the paint wouldn’t bleed through.
I measured where I wanted the numbers to make sure they were even and started painting, I just used regular acrylic paint from the craft section to paint the numbers.
After a few minutes to let the paint dry, I took off the stencils…viola! Amazing! I almost love it!
Two problems: problem number one, my stencils were a thick paper and where I got a little crazy with the paint and left it really thick it deteriorated the paper and some white was left around the edges of my numbers! I actually liked the look, they weren’t perfect numbers, it made the edges a little rough…I was happy that this problem occurred, but I just wanted to make everyone aware that it could happen, just in case this is not the look you want!
Problem number two: I wasn’t crazy about how silver the baskets were, they were a bit too much of a blingy, shiny silver, so I made a glaze out of black acrylic paint and water, I always start out just mixing half paint and half water, then slowly add more paint until it is just the right consistency to glaze the paint. It has to have enough water to dilute the paint so it doesn’t cover the silver but not too much water that it runs off. All you do is paint the black all over the silver and let it sit for a few minutes and then wipe it off with a paper towel. You can keep coating it until you get the desired effect that you want! I love giving shiny silver a black aged and industrial look!
Now we are ready to add the hanging hardware! This is awesome…we are so close to done and so quick! Ha!
I used this hanging hardware
I was thinking at the time that it needed to hold a lot of weight but really even with all the books in it, it isn’t all that heavy! So you can really use any type of hardware…the only thing is to make sure to measure where your studs are and make sure to place your hardware where they will hit the studs…another really great thing about DIY…customized hardware placing to make sure you get the studs! HA!
Then you hang this bad boy up on the wall and get your kids’ books off of the floor…or whatever else you may want to get off of the floor and place in this!
I hope you have a great time building this! If you have any questions on how to build the wall hanging storage baskets, or comments, feel free to leave them below! Make sure and sign up for my email subscriptions to be notified of new posts!
If you liked this post, you may like DIY Wall Hanging Blanket Ladder as well!
Hello Everyone! I am super excited to bring you my very FIRST POST EVER!!! Hopefully not my last! LOL! This DIY knockoff Restoration Hardware wood and steel console table is so special to me because not only is the tutorial my very first post, but also it is my first build that I designed the plans for myself! I have built many things with the help of Shanty-2-Chic or Ana White but this was the first time I saw a table I liked, I drew it out, came up with a shopping list and a cut list- all by myself! I still can’t believe I actually DID it and without even wasting any wood! Ha! Surprise Surprise!!!